Small Reach Regatta Day 2 in Drake Rowboat

I was a little nervous beginning day 2 on a long reach with a potentially gusty offshore breeze that would carry the fleet 8+ miles to the lunch stop. The cracked mast step was only glued back together last night. Would it hold? This was going to be the same tack that I was on when it snapped. I didnt want to ruin this sail!

While the rowboa

ts and sailboats waited for the whole fleet to be launched and hoist sail for the departure, I

lounged on the floorboards enjoying an egg sandwich made by the caterer who cooks for the event. The food is great and the camaraderie while dining is something I enjoy every year. I saved my sandwich for this moment, laying back on the thwarts in the morning sun watching all the sails around me skitter about waiting for the moment when the lead chase boat would say "every body is in, lets go!".

The sail was east to Flanders Bay where we were to lunch at a bar connecting Ash and Sheldrake Islands (family islands that I arranged for us to have as a lunch spot). The fleet sailed on port

tack on a beam reach for all 8 miles to the stop. It was a hoot to say the least. Drake was right up with all the Caledonia Yawls and other larger sail craft. People were quite surprised to see this long, skinny rowboat pass them or hold position next to boats with much larger sail areas. And to my delight the mast step held.

But this morning was proving something that I try to espouse whenever possible: a rowboat with at least some keel to it can sail downwind quite

fast, but not up wind. And you dont need to ruin

the lines of the boat for rowing and you do not need to add the complexity and drag that a centerboard or daggerboard introduces. Lee boards are simply not necessary for off the wind sailing. Drake has enough stability and keel to even sail without any slippage on a bean reach, and this was a revelation this morning on Frenchman Bay.

The lunch was quick as the tide was eating up the bar -- we arrived a little too late. But the scene was quite spectacular with MDI and Tunk mountain and islands all around. I was the first boat to the bar and the 50 or 60 boats sailing into the bar was just a blast to watch.

The return trip was a 8-mile row to windward, through Sorrento Harbor right by Hancock Point and dir

ectly to Lamoine State Park. Drake showed her stuff by being able to row a steady 4+ knots back to the start line and beat most of the sailboats that had to tack many times to get home. This is what she was designed to do: sail smartly off the wind and row efficiently upwind. If this were a real RAID I would have no doubt t

hat we could be very competitive and with a larger boat for two rowers, probably win. But I enjoy the autonomy, privacy, and relaxation that rowing and sailing alone can bring.

Read More..

Drake 19 Design Work Continues

Drake 19 Rowboat Project

Oar-and-Sail Tandem Rowboat and Cruiser with downwind sail

Drake 19 Rowboat with "squgsail" for off-the-wind sailing. Drake is primarily a rowboat (no board; rudder not shown above)

The 19 is essentially a stretched Drake 17 with the hull lines tweaked to support tandem rowing and fast, camp-cruising. The boat is being modeled currently and the hull lines tested next with a quarter scale model. Once the hull form is all set, the interior will be modeled and strongback prepared for kit-building. Im excited about this boat and look forward to setitng up the first builder. I always offer an intro discount for the first builder as they are providing me with the help of documenting the build and providing feedback. If interested in being the first builder, please let me know. You can be experienced or a beginner, but one project of experience is helpful as is some good ole problem solving abilities. The discount is generally 25-30% and the plans are free to the first builder.

Preparing the quarter scale model for the Drake 19. 

Read More..

NEW! Drake 19

On the Drawing Board

New Drake 19 for tandem rowing, cruising and expeditions

For Fixed Seat or Sliding Seat Rowing

This new version of the Drake Rowboat -- my first design/build project -- really combines all that I have learned as a designer and rower and builder over the years. She is intended with the following brief:

-- fast, stable cruising rowboat

--capacity for two people and gear

--fixed or sliding seat capable

--can sleep aboard on platform under a tent 

--sailing downwind is possible

Drake 19 modeled in Rhino

An important aspect of the boat is its simple sliding seat system : 7/8" o.d. stainless steel pipes run for and aft with 15" of separation on center. The pipes are integrate into the CNC cut structure. A plywood seat-roller floats over these pipes. Any oarlock system can be used, including leathered-round oars, Douglas oarloacks, C2 oarlocks, or the folding outriggers by Shaw and Tenney. However, I think for voyaging in open water that oar-on-gunwale will be the best way, using traditionally leathered oars in horn-oarlocks or to go with pinned oars. I do think 9-9 1/2 oars would be fine for experienced rowers, using folding outriggers to get the spread for the longer oars.

Midship section of the Drake 19 showing the sliding seat system.

The floorboards are show both sitting on the inner keel as floors and raised up and sitting on the pipes to make an over 8 long sleeping platform that finishes flush with the side tanks. These side tanks double as a sleeping platform and as flotation, making the boat self-rescuable in a capsize. 

Keep posted for 3D work which starts very soon.

Read More..

Drake 19 hull 1 built on Cape Cod

I took a pleasant 3 1/2 hr trip down to Wellfleet, MA, way out on the arm of Cape Cod, to meet Walter Baron of Old Wharf Dory Co. and see the first ever Drake 19 "in the flesh".

Walt of Old Wharf, boatbuilder on Cape Cod

The boat looked great to me. I was so pleased. Even as the designer, I was struck by how much boat there is; it is 192" LOA afterall. Designed to be an open water, cruising rowboat for one, the boat would also make an excellent tandem rowboat for rows in the harbor or in more open water.

Drake 19 rightside up.

The interior has two side tanks on either side of the sliding seat system. The tanks will help the boat be self rescuable, with some additional flotation in the ends, The rails slide right into precut holes in the frames of the boat. Everything fits just so.

Sliding seat system integrates into the CNC cut structure of the boat

After this build, and with a few months to finish out the drafting and writing of the manual, the boat will be available as a kit.

Read More..

Small Reach Regatta Finishes in Drake Rowboat

This sail is right off a Shellback dinghy, but a new more efficient downwind rig is in the works when we arent making other peoples rigs!

(photos by Christophe Matson in his Goat Island Skiff)

My wife, Ellie Chase, and I finished up a fabulous 3 days of rowing and sailing in Drake along with almost 40 other boats ranging from 12 foot dinghies to 15 sail and oar boats, to 22 foot daysailers. Drake often got to the lunch stops first because we were able to row upwind and sail downwind. It turned out that most of the time we rowed in tandem.

We love this mode of boating for getting around but you have to like to row and be in a good rowboat. And there is no need to ruin the lines of a rowboat by making it be able to sail, as long as you stick to sailing off the wind. We can sail easily on a beam reach down to a run. In the above we maintained 3.5-4kts in maybe 5-10kts total true wind.

See more at http://www.facebook.com/groups/104933556820/

Read More..