France Here We Come

OK not quite yet but we have the necessary qualifications to go.  Sorry to get you all excited.

Over the last month we have both been studying for the necessary qualifications we need to be in charge of our boat when we take it to France.

To be legal unless you are on a hire boat in which case you need no training, knowledge, experience what so ever! the master of the vessel needs to have a VHF radio licence, to know the CEVNI rules and demonstrate your competence to handle a boat, in our case over 10m, this is the ICC part.

We did the VHF first about 3 weeks ago on a day course.  This we both found very interesting, I especially liked the DSC part, but this is pretty useless on inland waterways accept for group calling or calling a known MMSI of another boat, a bit like a phone number.

Once we had our license I bought a fixed radio and a handheld.  Two are recommended for France.  We chose models form Standard Horizon.  The fixed set also has GPS which is a bit of an overkill for inland waterways but it was only a small amount more and it gives speed and heading information as well as the time. The handheld is a just simple VHF only set.

This is the main set. But ours is in black

Full details 

This is the handheld.

 

Full details

 

Once we had the VHF set it was then necessary to apply for Ship Radio License to get an MMSI number.  This was easily done online on the Offcom website and resulted in our own MMSI number 350974?? and our UK call sign 2GHQ6.  Part of this registration my personal details so the MMSI is tied to a user in case of emergency and I suppose misuse.  Once we are in Europe I will programme in a the ATIS

Then it was down to studying the CEVNI signs.  Its a bit like learning the highway code but for the river, except it’s not as well organised as its (IMO) a bit of a dog’s dinner as its compiled by bits from all over Europe.  As well as the signs theres also lots of different signs on various types of boat by day and night and differing in the type of vessels and what it’s doing.

This is the full CEVNI and here is a set of flash cards I compiled (with permission) from the initial work done by Bryan Griffin.  In the end the multiple choice paper was passed by both of us simply because we drilled ourselves with the cards for a good couple of weeks off and on.

Meet our new crew member MOB.

 

The practical part for the ICC Involved us taking our boat our with our examiner for the afternoon and demonstrating MOB (Man Over Board) recovery procedures and other boat handling and mooring skills as well as questions about river  craft, safety, emergency procedures.  Most of the handling was simply demonstrating what we do each time we take the boat out, but we did have to practise the MOB as we had never done this so  a good few ours were spent pirouetting around retrieving our very own MOB, yep a  buoy tied to a bucket.   The bucket acts as the simulated weight and sea anchor. Each time we practised this MOB it really got the adrenalin going.  Even though it was only a buoy and bucket it becomes so real.

Anyway, after that the instructor / examiner showing me my boat WOULD go backwards under control despite my insistence it wouldn’t and a final few questions he told us we had both passed.

I have also registered Avalon on the SSR and now sport the Reg. No.SSR1535623

I do have a massive blog to do on the very complex subject or Generators batteries and charging. I will get this done ASAP as I have learnt a lot with the help of Clive one of my blog readers.

Read More..

Advanced Alternator Regulator

To finish the alternator modification I have added to the house battery system an advanced alternator regulator made by Sterling Power Products  I chose the ProD model.

Unit on the right.  The left is the MPPT

The first thing to do was to connect 2 wires to the inside of the alternator.  Only one of these wires is used but it need to be determined which.

These wires go to the brushes in the alternator.

Cap back on and wires out of a convenient hole.

With the alternator running normally its necessary to identify which type of alternator sensing you have.  Mine is a Negative sensing.

Once the right wire is found simply snip the unused one off.

This explains what they do but in a nutshell it changes the charge profile of the original regulator in the alternator without modifying it. It will fail safe to the alternators own regulator if it encounters any number of possible problems protecting the alternator and batteries from themselves as it makes the alternator & batteries and connecting cables work much harder for longer.  The full manual is here. http://www.shop.sterling-power.com/acatalog/pdar.pdf

The additional load on the alternator started to cause the belt to slip on engine start up as the ProD loaded the alternator.  I could have added more tension to the belt but this just adds extra loading the the engine front bearing and the alternator bearing. To overcome this I applied some Belt Dressing which has done the trick.

While out this week the engine clocked up 200 hours.

Its very noticeable how much quieter the engine is becoming as time goes on, and since the alternator modification how much smoother it feels.  I can offer no explanation for this tough.

I have decided to change the central heating boiler and have ordered a Hurricane CH25

The Mikuni MX60 has been and continues to be great, its done sterling service for 2 winters but I want the greater flexibility the Hurricane offers with its zoning, hot water only and the added feature of being able, with the use of an additional heat exchanger, use the the engines waste heat to heat the radiators.

More on this soon.

Another modification on the horizon:-   I have ordered a new propeller.  The current one is 21 x 16 and I shall be replacing it with a 21 x 21.  I should get this in a few weeks and have a slot booked on a local crane day but I might try to do it in the water.  I looking into the feasibility of this.

.

Read More..

Rowing Sailing in France Finland Part 1

I recently returned from a wonderful 2 week business trip in Europe. The business in France was to sail and better get to know Francois Vivier and his designs. I felt it was a good idea as his sole US and Canada kit agent and boatbuilder to better understand the cultural backdrop to his boats. I had also hoped to get on many of the that I carry in my catalog but have not had the occassion to sail on to date. The plan was to sail in Pen-Hir to Semaine Du Gulfe Morbihan (photo left at sea), one of the premier boating festivals in the world with 100s of Vivier boats in attendance as well. The trip met and exceeded all expectations. Not only are Viviers small boats well represented but there were numerous large vessels of his design sailing in the Gulfe. I was able to get onto all the boats and gain a good feeling for how they row and sail.

While hove to in the 250-boat voile-aviron fleet (sail & oar), I was able to sail with Nicolas Vivier in his Morbic 12 and transfer to a kit built Ilur afterwards. It was a fantastic morning with this sort of activity, bouncing

from boat to boat and seeing so many Vivier boats in one place. It was like a

"live" floating advertisement for his boats!

The pictures dont do justice to just how many boats there were in the sail & oar fleet, one of 7 fleet

s in the Festival which took place over the whole Gulf and rotated night to night through the different p

orts. Other boat in the fleet were: Le Seil, Minhouet, B

eg-Meil, Ebihen 15, Ebihen 18, Aber, and Francois first sail & oar boat, Aven.

I was more taken with Aber than I had thought: she is beautiful, fast, and seaworthy.

If you speak French or even if you do not, it is worth watching a video about Francois and his work shot at the Morbihan week on board Pen-Hir and aboard Francoiss motorboat design, Koulmig, pictured in the background.

Read More..